Stock Bracket vs Home Made  |   Last Updated Feb. 05, 2003

Fabricated Bracket You are suppose to swap the solenoid around and use the bracket from a stock CB750. The stock bracket wouldn't work with my dimensions so I made my own bracket (shown before and after the solenoid, rectifier, and regulator are attached).

Stock Bracket

Stock Bracket Not much room at all between the solenoid and rectifier. They almost touch. I don't know how you're suppose to get the wires on.

Frabricated Bracket Note space between the solenoid and rectifier.

This page was made in the USA by a couple of guys hanging around the Home Depot under the direction of Russell Snyder. snydercentral.com is a humanitarian organization that helps millions of people each year cope with lots of free time on their hands. Visit http://www.snydercentral.com for more web based clutter. Your mileage may vary. Offer void in Arkansas and may cause cancer in California. Side effects may include headache, nausea, diarrhea, and vomiting.